تیم پژوهشی

Students

 

Sajjad Bouzari (Ph.D. Candidate), Working Area: Capacitive Deionization (CDI) for Water Desalination, Co-Supervisor: Dr. Bidi, Contact: s_bouzari[at]sbu.ac.ir

Hossein Sadeghi (Ph.D. Candidate), Working Area: Vortex Tube, Co-Supervisor: Dr. Jannesari, Contact: hsadeghi.eng[at]gmail.com

Arian Shabruhi (M.Sc. student), Thesis Subject: Performance Improvement of Combined Supercritical CO2 Power Cycle with Micro Gas Turbine Using Machine Learning Method, Consultant: Dr. Mohseni

Mehdi Fadaei (M.Sc. student), Thesis Subject: Droplet Generation in microfluidic devices under the influence of the magnetic field, Co-Supervisor: Dr. Majidi

Mostafa Zakeri (M.Sc. student), Working Area: Developing wind turbine performance prediction code using machine learning (ML), Co-Supervisor: Dr. Jahangiri

Davood Altafi (M.Sc. student), Thesis Subject: Numerical analysis of centrifugal compressor performance deviation due to the uncertainty of flow characteristics using uncertainty quantification(UQ), Consultant: Dr. Ghadimi

Mohammad Reza Mozafari Nia (M.Sc. student), Numerical investigation of flow structures around and in the wake of oscillating NACA4412 airfoil and validating with experimental, Co-Supervisor: Dr. Hashemi, Consultant: Dr. Majidi

Mohammad Shafie (M.Sc. Student): Working area: Micro wind turbines for urban areas, Co-Supervisor: Dr. Hashemi, 

Ehsan Ghamari (B.Sc. Student): Working area: Experimental study of droplet generation using the flow-focusing method in a microfluidic device, Co-Supervisor: Dr. Majidi, 

Maryam Hajimoradi (B.Sc. Student): Working area: Micron-sized particle handling using acoustic waves. 

Fatemeh Matini (B.Sc. Student): Working area: Microfluidic passive valve, Co-Supervisor: Dr. Majidi, 

Former Students

Roxana Keyhani (M.Sc.), Thesis Title: Design and modeling a  zero liquid discharge (ZLD) cycle 2019-2021.

Mohammad Ali Rahmatian (M.Sc.), Thesis Title: Numerical and experimental study of the effect of the duct on increasing the power of horizontal axis wind turbine, 2019, 2021 (Co-Supervised by Dr. Hashemi, Consultant: Dr. Majidi).

Behnam Attari (M.Sc.), Thesis Title: Design and modeling of a supercritical carbon dioxide turbine in power generation cycle, 2019-2021.

Javad Ranjbar Kermani (B.Sc.), Design and modeling of a supercritical carbon dioxide radial-flow turbine, 2021 (Co-Supervised by Dr. Mohseni).

Alireza Rezaeishaker (B.Sc.), Development of one-dimensional design method and three-dimensional numerical flow simulation of supercritical carbon dioxide centrifugal compressor (Co-Supervised by Dr. Mohseni).

Narges Gholam Hosseini (B.Sc.), Numerical simulation of droplet generation using the flow-focusing method to investigate the effective parameters, 2021 (Co-Supervised by Dr. Majidi).

Atabak Bahadornia (B.Sc.), Design and simulation of flow through a supersonic separator, 2021. 

Elnaz Nikoumanesh (M.Sc.), Thesis Title: Simulation of blood flow aorta vessel based on Fluid-Structure Interaction (FSI) analysis, 2018-2020 (Co-Supervised by Dr. Hashemi).

Simin Soltani (B.Sc.)– 2020. 

Seyed Mohammad Sajjad Seifi (M.Sc.), Thesis Title: Working Area: Developing a numerical platform for optimizing horizontally axis wind turbine blades, 2017-2020 (Co-Supervised by Dr. Hashemi).

Shervin Alirahimi (B.Sc.)-2020.

Mohammad Ali Gheidi Shahran (M.Sc.), Thesis Title: Experimental and numerical investigation on turbulence structures behind an oscillating wing using HWA, 2017-2020 (Co-Supervised by Dr. Hashemi).

Somayyeh Bayazidi (M.Sc.), Thesis Title: Flow Analysis for Performance Improvement of Nozzle-Diffuser Micropump with Multiple Vibrating Membranes, 2017-2019 (Co-supervised by Dr. Mohseni).

Seyed Morteza Sajadmanesh (M.Sc.), Thesis Title: Study of Boundary Layer Around a High-Lift Low-Pressure Turbine Blade of Gas Turbine Using Large Eddy Simulation, 2017-2019 (Co-supervised by Dr. Mohseni).

Olya Noruzshamsian (M.Sc.), Thesis Title: Designing a Micro-Separator Using Hybrid Pinched and Dielectrophoresis for Separating the Blood Cells, 2017-2019 (Co-supervised by Dr. Mohseni).

Sahar Abedi (B.Sc.)-2019.

Mehrdad Kavousi (M.Sc.), Thesis Title: Design and Optimization of a radial flow Turboexpander, 2016-2018 (Co-supervised by Dr. Mohseni).

Milad Alimoradi (M.Sc.), Thesis Title: Developing a Method to Creating appropriate Smooth surfaces for Wind Turbine Blades, 2016-2018 (Co-supervised by Dr. Hashemi Tari).

Mohammad Javad Mohebbi (B.Sc.)-2018.

Shabnam Mehrabi (B.Sc.)-2018.

Pouria Izanlou(B.Sc.)-2018.

Moein Talebian (B.Sc.)-2017.

Samaneh Esmaeilifar (B.Sc.)-2017.

Soroush Niazi (B.Sc.)-2017.

Fatemeh Gholamalian (B.Sc.)-2017.

Nima Khoshkalam (B.Sc.)-2016.