Journal Papers:
M. Fadaei, S. Majidi, M. Mojaddam, Droplet generation in a co-flowing microchannel influenced by magnetic fields applied in parallel and perpendicular to flow directions, 2023, Journal of Magnetism and Magnetic Materials, 15 (570), 170528.
S. Bouzari, M. Bidi, M. Mojaddam, S. H. Kazemi, Evaluating the effects of temperature on flow-by capacitive deionization, 2022, Energy Reports, 8, pp.15524-15530,
M. A. Rahmatian, P. Hashemi Tari, M. Mojaddam, S. Majidi, Numerical and experimental study of the ducted diffuser effect on improving the aerodynamic performance of a micro horizontal axis wind turbine, 2022, Energy, 245, 123267.
S. Karimi, M. Mojaddam, S. Majidi, P. Mehrdel, J. Farré-Lladós, J. Casals-Terré, Numerical and experimental analysis of a high-throughput blood plasma separator for point-of-care applications,2021, Anal Bioanal Chem, 413(11), pp.2867-2878.
M.A. Gheidi Shahran, P. Hashemi Tari, M. Mojaddam, Investigation the Aerodynamic Performance of NACA 4412 Airfoil at oscillating inlet condition, 2021, Journal of Mechanical Engineering, 51(2), pp. 177-186 (in Farsi).
O. Noruzshamsian, A. Mohseni, M. Mojaddam, Design of a Micro-Separator for Circulating Tumor Cells (CTCs) from Blood Flow Using Hybrid Pinched Flow Fractionation (PFF) and Dielectrophoresis Methods, 2020, Journal of Solid and Fluid Mechanics, 10(1), pp. 281-296 (in Farsi).
S.M. Sajadmanesh, A. Mohseni, M. Mojaddam, Vortex dynamics mechanisms of separated boundary layer in a highly loaded low pressure turbine cascade, 2020, International Journal of Heat and Fluid Flow, 82 (2020), 108540.
S.M. Sajadmanesh, M. Mojaddam, A. Mohseni, A. Nikparto, Numerical identification of separation bubble in an ultra-high-lift turbine cascade using URANS simulation and proper orthogonal decomposition, 2019, Aerospace Science and Technology, 93(2019), 105329.
N. Khoshkalam, M. Mojaddam, K. R. Pullen, Characterization of the Performance of a Turbocharger Centrifugal Compressor by Component Loss Contributions, 2019, Energies, 12(14), 2711.
M. Namazizadeh, M. Talebian Gevari, M. Mojaddam, M. Vajdi, Optimization of the Splitter Blade Configuration and Geometry of a Centrifugal Pump Impeller using Design of Experiment, 2020, Journal of Applied Fluid Mechanics, 13 (1), pp. 89-101.
S.M. Sajadmanesh, M. Mojaddam, A. Mohseni, Investigation of Separation Bubble Behavior on the Suction Side of a High-Lift Low-Pressure Turbine Blade Using Proper Orthogonal Decomposition, Modares Mechanical Engineering, 2019, 19 (10) (in Farsi).
M. Mojaddam, K. R. Pullen, Optimization of a Centrifugal Compressor Using the Design of Experiment Technique, 2019, Applied Sciences, 9(2), 291.
S. Seifi, M. Mojaddam, P. Hashemi Tari, Optimal design of a blade of a small horizontal axis wind turbine (HAWT) with considering mechanical constraints, Modares Mechanical Engineering, 2018, 18(5), pp. 405-413 (in Farsi).
M. Mojaddam, S.A. Moussavi-Torshizi, Design and optimization of meridional Profiles for the impeller of radial flow compressors, Journal of Mechanical Science and Technology, 2017, 31(10), pp. 4853–4861.
M. Mojaddam, A. Hajilouy-Benisi, Optimum Design, Fabrication & Test of a Radial Flow Compressor Volute, Sharif Journal: Mechanical Engineering, 2017, 33(3), pp. 17-28 (in Farsi).
M. Mojaddam, A. Hajilouy-Benisi, Experimental and Numerical Flow Investigation through a Radial Flow Compressor Volute, Journal of Applied and Computational sciences in Mechanics, 2017, 28(1), pp. 1-14 (in Farsi).
M. Mojaddam, A. Hajilouy-Benisi, Experimental and numerical flow field investigation through two types of radial flow compressor volutes, Experimental Thermal and Fluid Science, 2016, 78, pp. 137-146.
M. Mojaddam, A. Hajilouy-Benisi, M. R. Movahhedy, Optimal design of the volute for a turbocharger radial flow compressor, Proceedings of The Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 2015, 229(6), pp. 993-1002.
M. Mojaddam, A. Hajilouy-Benisi, S. A. Moussavi-Torshizi, M. R. Movahhedy, M. Durali, Experimental and numerical investigation of radial flow compressor component losses, Journal of Mechanical Science and Technology, 2014, 28(6), pp. 2189-2196.
M. Mojaddam, A. Hajilouy-Benisi, M. R. Movaheddy, Experimental and numerical investigation of radial flow compressor volute shape effects in characteristics and circumferential pressure non-uniformity, Scientia Iranica. Transaction B, Mechanical Engineering, 2013, 20(6), pp. 1753-1764.
Selected Conference Papers
M. Fadaei, S. Majidi, M. Mojaddam, Ferrofluid droplet formation in a co-flowing microchannel in the presence of a uniform magnetic field, 30th Annual International Conference on Mechanical Engineering-ISME2022, 2022, Tehran, Iran, May 10-12 (in Farsi).
D. Altafi, M. Mojaddam, B. Ghadimi, Investigation of the effects of the geometric deviations on the performance of a radial flow compressor employing uncertainty quantification (UQ), 12thAnnual International Conference on IC Engines & Oil (ICICE&O-12), 2022, Tehran, Iran, May.17-19 (in Farsi).
Zakeri, M. Mojaddam, P. HashemiTari, A. Jahangiri, Performance prediction of a micro horizontal axis wind turbine (HAWT) using blade element momentum(BEM) theory, 30th Annual International Conference on Mechanical Engineering-ISME2022, 2022, Tehran, Iran, May 10-12 (in Farsi).
Ghamari Arbati, M. Mojaddam, S. Majidi, Experimental and numerical investigation of droplet generation using the flow-focusing method, 30th Annual International Conference on Mechanical Engineering-ISME2022, 2022, Tehran, Iran, May 10-12 (in Farsi).
D. Altafi, M. Mojaddam, S. Javadi, M. Mohammadi, Entropy generation analysis of a turbocharger centrifugal compressor in the range of surge to choke, 12thAnnual International Conference on IC Engines & Oil (ICICE&O-12), 2022, Tehran, Iran, May.17-19 (in Farsi).
S. Bouzari, M. Mojaddam, Low Reynolds number flow of non-Newtonian fluids over oscillating cylinders, 27th Annual International Conference on Mechanical Engineering-ISME2019, 2019, Tehran, Iran, Apr. 30-May 2.
M. Kavousi, M. Mojaddam, A. Mohseni, Design and simulation of a radial flow micro turboexpander for the specified operating conditions, 9th National Conference on CFD Applications in Chemical and Petroleum Industries, 2018, Tehran, Iran, Nov. 21 (in Farsi).
S. Esmaeilifar, M. Mojaddam, Performance analysis of a small radial turboexpander in an Organic Rankine Cycle (ORC), 12th International Energy Conference, 2018, Jun. 19-20 (in Farsi).
S. M. Sadjadmanesh, A. Mohseni, M. Mojaddam, Flow Simulation Around a High-Lift Blade in a Low-Pressure Gas Turbine Using RANS Equations, The 6th National Gas Turbine Conference (GTC96), 2018, Tehran, Iran, Feb. 6-7 (in Farsi).
M. S. Seifi, M. Mojaddam, Optimization of the HAWT blade airfoil to increase the output power, 25th Annual International Conference on Mechanical Engineering-ISME2017, 2017, Tehran, Iran, May 2-4 (in Farsi).
M. Gheidi, M. Mojaddam, P. Hashemi Tari, Numerical Simulation of the flow field around a Horizontal Axis Wind Turbine blade comparing CFD and BEM, 5th Iran Wind Energy Conference, 2017, Tehran, Iran, Oct. 10-11 (in Farsi).
M. Talebian, M. Mojaddam, Centrifugal compressor diffuser optimization by means of DoE methods and RSM, 25th Annual International Conference on Mechanical Engineering-ISME2017, 2017, Tehran, Iran, May 2-4.
M. S. Seifi, M. Mojaddam, Optimization of the HAWT blade airfoil to increase the output power, 25th Annual International Conference on Mechanical Engineering-ISME2017, 2017, Tehran, Iran, May 2-4 (in Farsi).
M. Talebian, M. Mojaddam, Optimization of Centrifugal compressor impeller using Design of Experiment method and RSM, 5th Annual National Gas Turbine Conference, 2016, Tehran, Iran, Nov 8-9 (in Farsi).
N. Khoshkalam, M. Mojaddam, Performance Prediction of a one Stage Radial Flow Compressor, 24th Annual International Conference on Mechanical Engineering-ISME2016, 2016, Yazd, Iran, April 26-28 (in Farsi).
M. Mojaddam, A. Hajilouy-Benisi, M. R. Movahhedy, Optimal design of the volute for a turbocharger radial flow compressor, Proc. of ASME-Turbo Expo, 2014, Düsseldorf, Germany, June 16 – 20.
A. Doostmohammadi, A. Hajilouy-Benisi, M. Mojaddam, Experimental & Numerical Investigation of losses in centrifugal compressor components, Proc. of ASME Turbo Expo, 2013, Texas, USA, June 3-7.
M. Mojaddam, A. Hajilouy-Benisi, M.R. Movahhedy, Performance Investigation of a Centrifugal Compressor-Part 1: Experimental Study, 21th Annual International Conference on Mechanical Engineering-ISME2013, 2013, Tehran-Iran, May 7-9.
M. Mojaddam, A. Hajilouy-Benisi, M.R. Movahhedy, Investigation on effect of centrifugal compressor volute cross-section shape on performance and flow field, Proc. of ASME Turbo Expo, 2012, Copenhagen, Denmark, July 11-15.
M. Mojaddam, A. Hajilouy-Benisi, M.R. Movahhedy, Study of volute losses in a centrifugal compressor considering geometrical parameters, 20th Annual International Conference on Mechanical Engineering-ISME2012, 2012, Shiraz, Iran, May 16-18.
M. Mojaddam, A. H. Asgarshamsi, A. Hajilouy-Benisi, Performance Test and Error Analysis of a Turbocharger Turbine and Compressor, 20th Annual International Conference on Mechanical Engineering-ISME2012, 2012, Shiraz, Iran, May 16-18 (in Farsi).